The place to be installed should be free from sunshine, frost, pollutant and water. During the period of frost, the inlet Valve in the meter should be closed and the outlet valve and water tap should be open except for being packed for thermal insulation, thus to prevent the damage from being frozen.
What is the details for Pulse Output Water Meter?
Product Description–Pulse Output Water Meter: It is equipped with a reed switch assembly which can be connected to remote reading system, The Reed Switch Pulse sends out electric signals per a preset water quantity.
–Magnetic drive, protected against external magnetic tampering;
–Vacuum sealed register, frost resistant, keeps clear reading for long time;
–Brass body can be painted
–External adjusting device,;
–For cold water;
–Remote transmission device can be added upon request
–Many kinds of sensors, such as Reed Switch, Hall and Weagand can be supplied upon request Pulse output may be 1l/pulse ,10l/pulse ;
–The meters conform to ISO4064 Standard Class B
2. Working condition:
–Water pressure≤1MPa (PN: 1.6MPa/16bar)
From minimum flow-rate (qmin) inclusive, to transitional flow-rate (qt), exclusive:±5%
4. Installation And Usage for the Pulse Output Water Meter
Select the right water meter according to nominal flow rate which is less than or next to the rate through the pipe. It is not a good way for the user to buy the water meter based on the pipe size.
Meter should be installed horizontally, and the digits on the dial is up to the face and arrow direction in the meter should be same with the flow.
The stone, sand and slight impurities in the new installed pipe should be cleared off for the sake of the meter fault.
For the purpose of metering accurately, the water tap should be higher than the meter.
Water meter should be not connected with pipe and there are live interface (e.g. pipe interface, connection screw, sealing washer etc.) between the meter and pipe. The meter should not be damaged due to the over-stress caused by pipe and its elements during installation
We could accept your trial order,then you can take this opportunity to check the quality of our products & service of our company
Logo: Buyer’s logo imprint accepted
Sample Policy: We can supply you sample for checking quality,if you pay for the sample & sample freight. we will deliverto you in 1-3 days after we got your payment.
Lead time: The normal Lead time is 15-30 days , which depends on your quantity.
List Of Competitive Advantage:
We are factory, can provide you high quality, best price
Professional employee and effective management
Professional trading service
Good service & reputation
Large production line
Welcome to visite our factory
- Model NO.: LXSG-15E-50E
- Medium Temperature: Cold and Hot Water Meter
- Counter Instructions: Digital
- Application: Civil
- Medium Pressure: Pn16
- Stucture: Wireless Communicating
- Diameter: 15-25mm
- MOQ: 100piece
- Specification: ISO9001, CQM,
- HS Code: 90282010
- Install: Horizontal
- Level Measurement: B
- Nominal Diameter: 15-25mm
- Principle: Speed of Water Meter
- Work Environment: Dry Water Meter
- Materail: Brass or Iron
- Cert: ISO9001
- Trademark: gaoxiang
- Origin: Shangdong, Chian